性能特點
Main Feature
1. 能實現板內板外和片,充氣時采用板內合片,板內合片可實現大小片、玻璃幕墻的生產。
2. 全程PLC 控制系統,觸摸屏人機界面
3. 自動識別鍍膜和Low-E 玻璃的膜層面
4. 清洗機風刀根據玻璃厚度自動調整
5. 清洗鍍膜、Low-E 玻璃時,毛刷轉速可變頻驅動。
6. 鋁框自動定位,玻璃自動定位系統
7. 自動檢測玻璃長度、高度,自動調節最佳充氣時間,節省用氣量
8. 板內充氣壓片機采用四軸伺服聯動,具有合片、壓片、充氣一體功能,保證中空玻璃氬氣含量≥ 85%
9. 具有遠程監控和程序升級功能
1.Achieve the functions of outside and inside assembly,automatically fill argon gas and stepped glazing
2.Adopts the PLC to control the working condition and touch screen
3.Automatic detect coated surface of coating glass and Low-E glass
4.Air knife can automatic adjust according to glass thickness.
5.Brushes’rotate speed variable frequency drive.
6.Aluminum spacer and glass automatic positioning system
7.Automatic detect the length and height of glass, automatic adjust the best gas filling time
8.Automatic gas filling press machine adopt 4 servo motors, which has assembling, pressing and automatic gas filling functions. Ensure the insulating glass argon gas concentrate ≥ 85%
9.It has remote monitor and program upgrade functions.
技術參數
Main technical parameter
最小玻璃尺寸(Min.glass size):300mm×400 mm
清洗玻璃厚度(Washing glass thickness):3~15 mm
清洗玻璃速度(Washing glass speed):3~10m/min
電功率(Power supply):380V/50Hz 37.5kw
中空玻璃厚度(Insulating glass thickness):15~60mm
傳送玻璃速度(Transmission glass speed):45 m/min
壓縮空氣、流量(Compressed air,F(xiàn)low volume):0.8m3/ min
氣壓(Air pressure):0.7Mpa
充氣時間(Gas filling time)3~5s
環境溫度(Environment temperature):7~50℃
毛刷 (brush): 6 根pieces (3 根low-e 毛刷/ 3 low-e brushes)
主要技術參數(Main Techniq ue Parameter) | |||||||||
產品型號 Product model | 最大玻璃尺寸mm Max.glass size | Low-E | 大小片 Stepped glass | 三 層 Triple glazing | 四層 four layers | 設備尺寸L×W×H Dimension mm | 功 率 Power supply | 功能段 Function section | 翻轉臺 Overturning platform |
LBW2500PCH | 2500×3500 | √ | 選裝optional | √ | √ | 25410×2800×3450 | 37.5KW | 7 | 選裝optional |
LBW2700PCH | 2700×4000 | √ | 選裝optional | √ | √ | 28350×3000×3650 | 39.5KW | 7 | 選裝optional |
吉林省長春市